GetPreparedStuff

Guide · Water

How to purify water

Four methods, each with honest limits. Boiling is best; bleach is the backup; filters and tablets cover the gaps. None of them fix chemical contamination — and any source that says otherwise is selling something.

1. Boiling — the gold standard

Bring water to a rolling boil for 1 minute. At altitude — CDC says above 6,500 ft, EPA above 5,000 ft — boil for 3 minutes. Most of Utah lives in the overlap, so use 3 minutes and stop worrying about which threshold applies. Let it cool, store it covered. Boiling kills bacteria, viruses and protozoa; it does not remove chemicals, fuel, salt or radioactivity, and it concentrates some contaminants as water evaporates.

2. Bleach disinfection — the exact doses

WaterClear waterCloudy water
1 gallon8 drops unscented bleach (5–9% sodium hypochlorite — the active ingredient printed on every bleach label)16 drops
1 quart2 drops4 drops

Stir and wait 30 minutes. The water should have a slight chlorine smell; if it doesn't, repeat the dose and wait 15 more minutes. Use fresh bleach — it loses strength in storage — and never use scented, splash-less, or color-safe products.

3. Filters — what they actually remove

Most portable filters (0.1–0.2 micron class, including squeeze and gravity systems) remove bacteria and protozoa (single-celled parasites) — Giardia, Cryptosporidium, E. coli. Most do not remove viruses. If viral contamination is the concern (flooding near sewage, travel), filter first, then disinfect with bleach or tablets. "Purifier" is a regulated claim about virus removal — check whether a product meets it before believing the box.

4. Chemical tablets

Chlorine dioxide and iodine tablets disinfect without fuel or measuring drops. Read the wait time and mean it: chlorine dioxide can need 4 hours to handle Cryptosporidium. Tablets are the go-bag layer, not the household workhorse.

The hard limit: boiling, bleach, filters and tablets cannot make water contaminated with fuel, toxic chemicals or radioactivity safe. For those events, the answer is bottled water and official instructions — full stop.

The gear layer

ItemPriorityHow muchWhyShop
Squeeze water filter
Filtration
P0 1 filter per household — plus a spare Removes bacteria and protozoa from natural water. It does not remove viruses — disinfect after filtering when viral risk matters. Check price on Amazon

Estimated $25–$40 per filter (as of Nov 18, 2026)

Gravity water filter system
Filtration
P1 1 system per household Filters for the whole household without pumping or power. Check exactly which contaminants a system is tested to reduce — filter claims vary. Disclosure on the Big Berkey link: Black Berkey elements are NOT NSF/ANSI certified (Berkey publishes its own commissioned lab reports instead), and Black Berkey elements were subject to an EPA stop-sale order from 2022 — check current element availability before buying. The Platypus GravityWorks is this site’s pick. Check price on AmazonCheck price on Amazon

Estimated $60–$330 per system (bag systems low, stainless countertop high) (as of Nov 18, 2026)

Water purification tablets (chlorine dioxide / PA)
Purification
P0 1 pack per household — per kit The disinfection layer that fits in a pocket. Unlike most squeeze filters, chemical treatment addresses viruses — read the wait time on the packet (chlorine dioxide can take 4 hours for Cryptosporidium). Iodine caution (CDC): iodine tablets such as Potable Aqua are not for pregnant people, people with thyroid disease, or prolonged use — chlorine dioxide is the default pick here. Check price on AmazonCheck price on Amazon

Estimated $10–$16 per pack (as of Nov 18, 2026)

Unscented household bleach (5–9% sodium hypochlorite)
Purification
P0 1 bottle per household — fresh, unscented (5–9% sodium hypochlorite) — Disinfection: 8 drops per gallon of clear water, double if cloudy, stir and wait 30 minutes. Disinfects water when boiling is not possible. Bleach cannot make chemically contaminated water safe.

Estimated $4–$7 per bottle (as of Nov 18, 2026)